PRODUCTS 



       
       








Designed specifically for mobile or stationary applications for the military and military electronics industry

COOLING
HEATING
DEHUMIDIFYING
HUMIDIFYING
FILTERING

The Series MAC air conditioning units are designed for use under extremely severe operating conditons, and will give dependable service abnormaldespite temperature ranges. Materials, construction and inspection requirements conform with many MIL Specs. Electrical and refrigeration systems are simply yet reliably, engineered for easy field service.             

SPECIFICATIONS EXPLANATIONS

NOTES:

WEIGHT - Approximate weight of standard unit, lbs.

AIR QUANTITY - At sea level and with static pressure external to unit 50" watergage, CFM.

COOLING CAPACITY - At ambient conditions indicated, tons of refrigeration.

1. One ton of refrigeration is equal to 12,000 
Btu per hour cooling capacity

2. Approximate weights given include on
allowance for typical additional features.

3. Cooling capacity based on air entering
unit at 80° F dry bulb and 67° F wet bulb
with air quantity as indicated in chart.

4. Coolling capacities are for estimating only
Consult factory for our specific recommendations 
on your requirement. 

 

 

1. Access doors for refrigeration components and air filter.
2. Access door for heaters, circulating fan and motor.
3. Condenser air discharge (protected by safety screen). 
4. Electric boxÑall electrical contactors, over-loads switches, etc., located in this box. Electrical , connections to be made by customer in rear or either side of this box. 
5. Refrigeration compressors easily accessible for maintenance. 
6. Return air openings.
7. Supply air opening.
8. Rubber seals 3/4Ó x 3/4, recommended for sealing unit.

 
 

  www.IMPACair.com      MIL SPEC TOUGH!